Multicam 3000 Series 3-103-R 4′ x 8′ CNC Router w ATC & Vacuum Pump

Hot Sale Multicam 3000 Series 3-103-R 4′ x 8′ CNC Router w ATC & Vacuum Pump Only USD $14.700.00 Good condition and ready to use, come with 1 year warranty. The MultiCam 3000 Series 3-103-R CNC Router is a heavy-duty industrial workhorse designed for high-speed precision cutting in wood, plastics, and non-ferrous metals. The “3-103-R” designation signifies a 4′ x 8′ working table configuration featuring a moving gantry and fixed-bed design

General Info
Brand: Multicam
Model: 3000 Series 3-103-R
Serial #: PF05580
Year: 2007

• Working Area (X x Y): 50” x 100” (1,270 mm x 2,540 mm)
• Z-Axis Clearance: 6” (152 mm) standard (Optional factory upgrade to 10″ available on some builds).
• Z-Axis Travel: 12” (304 mm)
• Repeatability: +/- 0.001″ (0.025 mm)
• Positional Displacement Accuracy: +/- 0.005″ over 10 feet
• Maximum Cutting Speed: Up to 1,400 IPM (Inches Per Minute)
• Maximum Rapid Traverse: Up to 2,500 IPM
• Machine Weight: Approx. 4,000 lbs to 4,500 lbs (depending on gantry and spindle options). 

• Spindle Manufacturer: Typically equipped with an Italian Colombo precision routing spindle.
• Spindle Power: 5.5 HP standard (Configurations ranging up to 10 HP or 13.4 HP exist depending on custom orders).
• Spindle Speed Range: 4,000 to 32,000 RPM (Variable speed regulated via inverter).
• Automatic Tool Changer (ATC): 6-position linear ride-along tool rack (Holds standard ISO 25 tool holders balanced for high speed).
• Tool Calibration: Features an integrated automatic tool touch-off surface block for precision Z-axis referencing

• X & Y Axis Drives: Integrated 25-mm linear ball-bearing profile rails paired with heavy-duty Rack and Pinion mechanics.
• Z-Axis Drive: High-precision Ball Screw mechanism.
• Motors: High-speed, digital brushless AC Servo drives and motors (Technic system) providing zero vibration and rapid acceleration.
• CNC Controller: MultiCam EZ Control stand-alone controller handled via a hand-held pendant keypad. Features 12 MB of onboard memory.

• Work Surface: 1″ thick phenolic vacuum grid table machined flat for uniform vacuum distribution.
• Zoning: 4-zone manual/automatic air configuration to direct hold-down suction where needed.
• Vacuum Pump: Most packages came bundled with either a 10 HP or 20 HP MultiCam TurboVac Positive Displacement (PD) pump or a 17 HP Gardner Denver high-flow vacuum system. 

• Input Voltage: 208V / 230V / 460V
• Phase: 3-Phase standard (though select retrofitted control cabinets can handle single-phase for shop scaling).
• Air Requirements: Clean, dry compressed air regulator set to approximately 100 PSI to handle ATC pneumatic mechanics