Motion Master 5-Axis bridge-type Updated CNC Router

HOT SALE !!! Motion Master 5-Axis bridge-type Updated CNC Router only $ 32.900. Come with 1 year warranty. 5 axis CNC router, Motionmaster, 4×8 moving table, 24 in Z-height stroke, Hiteco ATC 10hp spindle, Fagor 8055 CNC (new as of 2021), remote. Model #E810. Upgraded geared head, remote hand controller, tool touch-off pad, and micro-misting system. Mechanically tight and well-maintained. Made in 2004, refurbished 2014, then upgraded in 2021. Table setup for vacuum hold-down system but not currently hooked up. Machine includes two 10 HP vacuum turbine pumps. Machine requires a 120v 30 amp connection for the servos, and a 440v 20amp connection for the spindle (a 240v to 440v 15 kV transformer is included). Vacuum pumps are 220v. Footprint is 16’ long by 8’ wide. Lower gantry makes for a stiffer machine that only needs 8’ of vertical clear height. Machine includes tooling, tool holders, tool holder setting stand and wrenches.

• X-Axis Travel: Typically ranges from 80 inches to 124 inches depending on single or twin table setups.
• Y-Axis Travel: Typically ranges from 64 inches to 136 inches.
• Z-Axis Stroke: High-clearance architecture providing 30, 36, or 48 inches of vertical travel.
• B-Axis (Tilt): ± 270° or ± 100° (Alpha gear-driven or custom series II yoke).
• C-Axis (Rotation): ± 183° up to continuous ± 360° tracking. 

• X & Y Rapid Traverse: Up to 800 inches per minute (IPM).
• Z-Axis Rapid Traverse: Up to 400 inches per minute (IPM).
• Rotary Speeds (B & C): Up to 100 degrees per second. 

• Design Options: Rigid overhead bridge with options for a single large table (5′ × 10′) or flexible Twin Tables (5′ × 5′ each).
• Twin Table Mode: Can run independently for pendulum processing or be locked together to create a single massive working envelope.
• Material: Heavy-duty cast or grid aluminum machined for vacuum fixtures. 

• Primary CNC Controller: Upgraded to the modern Fagor 8055 Power CNC or Fagor 8065 system (replacing older Fagor 8050 legacy units).
• Modern Interface Features: Ethernet connectivity, Tool Radius Compensation, TCP (Tool Center Point tracking), and Offset Plane Programming (G49).
• Teach Pendant: Handheld CNCPD remote teach pendant included for rapid manual positioning and raw program editing at the machine side. 

• Spindle Motor: High-performance 9 HP to 10 HP automatic tool change (ATC) spindles, typically manufactured by HSD (e.g., HSD ES919/ES929) or Giordano Colombo.
• Spindle Speed: Variable RPM peaking at 24,000 RPM.
• Tool Changer: 6, 8, or 10-position traveling tool carousels or static tool racks. 

• Electrical Requirement: 440V – 480V, 3-Phase, 60Hz power grid.
• Pneumatics: 90 PSI @ 5 to 10 CFM for tool release and dust extraction gates.
• Mechanical Updates: Typically retrofitted with newer Wittenstein Alpha gearmotors, dynamic braking systems, and automatic lubrication lines.