Cantek JEN-60 Drawer Notcher-3PH

HOT SALE !!! Cantek JEN-60 Drawer Notcher-3PH, only $ 8.400, come with 1 year warranty. The Cantek JEN60 Drawer Notcher (3-Phase model) is a high-production woodworking machine built to cut clean notches and rear holes for concealed undermount drawer slides. It processes up to 220 drawer boxes per hour using a 3 HP 3-phase motor and convenient foot-pedal pneumatic operation.

Specification: 
Main cutter motor : 3 HP
Notch dimensions : 2 ¼”(57mm)x0.5”high
Cutter diameter : 10”
Drill diameter : ¼”
Table size : 49” x 22”
Table height from floor : 32”
Dust port : 4” (670 CFM requirement)
Compressed air required : 90 – 100 PSI
dimensions : 48” x 37 ¾” x 39 ¾”
weight : 506 lbs.

Machine Inclues
Solid carbide drill bit 1/4″ (6.3MM) 118o
10” (255mm) x 2 ¼” (57mm) insert cutter head with 70 pcs. (14x14x2.0mm)

• Main Motor: 3 HP 
• Electrical System: 3-Phase, 60 Hz

• • 230V Variant: 9 Amps
  • 460V Variant: 4.8 Amps 

• Notching Capacity: 2-1/4″ (57 mm) width × 0.5″ (12.7 mm) height 
• Cutterhead Diameter: 10″ (255 mm) insert cutterhead with 70 solid carbide insert pieces 
• Drill Bit Size: 1/4″ (6.3 mm) solid carbide drill bit, 118° angle 
• Production Capacity: Up to 220 complete drawer boxes (left and right sides machined) per hour
• Cycle Speed: Approximately 10 seconds per drawer box 
• Compressed Air Requirement: 90 – 100 PSI working pressure (minimum 60 PSI input) 
• Dust Collection: 4″ exhaust port with a 670 CFM requirement (or dual 4″ setup requiring up to 1,340 CFM depending on exact shroud config) 
• Table Size: 49″ × 22″ working table 
• Table Height: 32″ from the floor 
• Machine Dimensions: 48″ W × 37.75″ D × 39.75″ H
• Machine Weight: 506 lbs (Shipping weight: 612 lbs) 

• Pneumatic Control: Foot-pedal operation actuates both the cutterhead rise and the inward horizontal drill stroke simultaneously. 
• Self-Indexing Drill Unit: The pneumatic fence features an automatic sensor switch; pushing the drawer against the fence automatically shifts the drill into the correct position for either a left or right notch. 
• Safety Lockout: The cycle will not start unless the drawer box triggers the safety limit switch on the fence to prevent accidental firing.
• Adjustable Output: The cutter stroke speed and drilling forward speed can be adjusted independently to avoid wood blowout and secure clean cuts across different material compositions.