Piranha P90 Hydraulic | IRONWORKER

Hot Sale Piranha P90 Hydraulic | IRONWORKER Only USD $19.900.00 Good Condition and Ready To Use, Come with 1 year warranty. The Piranha P-90 Ironworker is a heavy-duty 90-ton hydraulic ironworker made in the USA. It features a 10-inch punch throat depth, an 18-inch flat bar shear, a 5″ x 5″ x 1/2″ angle shear, and runs on a 10 hp, 230/460V 3-phase motor.

•Stations: 5
•Rated Capacity (tons): 90
•Punching Capacity (Std): 1-1/8 inch OD in 1 inch plate
•Punching Throat Depth (inches): 10
•Punching Work Height (inches): 42
•Flat Bar Shearing Max Width (inches): 1/2 x 18
•Flat Bar Shearing Max Thickness (inches): 1 x 8
•Angle Shear Max Size 90 Deg (inches): 5 x 5 x 1/2
•Coper Notcher Max Cap (inches): 3-1/2 x 5 x 3/8
•Round Bar Shear Capacity (inches): 1/2 to 2
•Square Bar Shear Capacity (inches): 1/2 to 1-3/8
•Stroke (inches): 4-7/8
•Cycle Time: 32 at 3/4 inch (45 at 3/4 with optional Speed-Up Kit)
•Motor (Std): 10 hp, 220/440 volt, 3 phase
•Motor (Opt): 10 hp, 220 volt, 1 phase
•Hydraulics: 10.5 gpm
•Valve Pressure: 2900 psi
•Reservoir Capacity: 25 gal
•Weight (pounds): 4250
•Dimensions (LxWxH): 79 x 31 x 64

• Punch Station:

• • Maximum Force: 90 Tons
  • Maximum Hole Size: 1-1/8″ diameter through 1″ thick mild steel
  • Throat Depth: 10″

• Flat Bar Shear:

• • Maximum Width x Thickness: 18″ x 1/2″, 12″ x 3/4″, or 8″ x 1″ 

• Angle Shear:

• • Maximum Size: 5″ x 5″ x 1/2″

• Round & Square Bar Shear:

• • Round Bar Capacity: 1/2″ through 2″ diameter
  • Square Bar Capacity: Up to 1-3/8″

• Integrated Coper / Notcher:

• • Maximum Capacity: 3-1/2″ x 5″ x 3/8″ 

• Main Motor: 10 HP
• Electrical Profile: 230V / 460V, 3-Phase, 60 Hz
• Stroke Length: 4.875″ (4-7/8″)
• Hydraulic Pump Flow Rate: 10.5 GPM
• Hydraulic Relief Valve Pressure: 2,900 PSI
• Hydraulic Oil Capacity: Up to 25 gallons of ISO Grade 32 fluid
• Platen Working Table Size: 12″ x 21″ 

• Machine Net Weight: 4,250 lbs
• Shipping / Rigging Weight: Approx. 4,400 to 5,000 lbs
• Footprint Dimensions: 32” W x 80” L x 64’’ H (standard configuration variants up to 35″ x 90″ x 66.5″) 

• No Slug-Loss Shearing: Saves physical raw material and keeps shop floors cleaner.
• Automatic Hold Downs: Urethane and mechanical clamping assemblies keep raw parts from twisting or shifting mid-cut without manual configuration adjustments.
• Dovetail Quick-Change Slide: Enables an operator to pull and swap punch-to-bending setups in seconds