GT-3080 | GANESH CNC Lathe with FANUC 10″ Bore

Hot Sale GT-3080 | GANESH CNC Lathe with FANUC 10″ Bore Only USD $32.200.00 Good condition and ready to use, come with 1 year warranty. The Ganesh GT-3080 BB Heavy Duty CNC Lathe equipped with a 10″ Big Bore Spindle and a FANUC Control System is a flat-bed machine designed for large-diameter oil-field and heavy-duty turning applications.

INCLUDES:

8 STATION TURRET
25” 3 JAW CHUCK (Installed on machine)
20” 3 JAW CHUCK (New in Crate)
FANUC OiTD CONTROL
TAILSTOCK MT#6
CHIP CONVEYOR
COOLANT TANK and PUMP
10” SPINDLE BORE FRONT and REAR

• Swing Over Bed: 30” (760 mm)
• Swing Over Cross Slide: 19” (480 mm)
• Maximum Turning Diameter: 24”
• Center Height: 15” (380 mm)
• Bed Width of Ways: 18” (460 mm)
• Z-Axis Machining Length: Typically 78″ to 96″ (varies by ordered bed lengths ranging up to 160″) 

• Spindle Bore: 10” (254 mm) 
• Spindle Nose: A2-15 heavy-duty mount 
• Chuck Size: Typically paired with a 24” or 25” 3-jaw manual/hydraulic front chuck 
• Rear Chuck Mount: Included standard for oil country/pipe-threading applications 
• Spindle Speeds: 18 – 600 RPM
• Spindle Gear Ranges: 2 automatically-selected mechanical ranges
  • Low Range: 18 – 186 RPM
  • High Range: 60 – 600 RPM 

• Spindle Torque: 1,475 ft-lbs in low gear / 442 ft-lbs in high gear 

• Spindle Motor: 30-HP Peak (25-HP 30-minute continuous rated)
• Rapid Traverse Feedrate (X / Z): 394 IPM (10 m/min)
• X-Axis Cross Slide Travel: 19.63″ 

• Tool Turret: 8-Station Hydraulic Turret (standard)
• O.D. Tooling Size: 1” square tools
• I.D. Boring Bar Capacity: 1.5” (40 mm) standard holders
• Turret Index Time: 0.4 seconds 

• Tailstock Positioning: Manual positioning with air-assist
• Tailstock Quill Stroke: 7.87” (200 mm)
• Tailstock Quill Diameter: 4.92” (125 mm)
• Tailstock Quill Taper: Morse Taper #6 (MT#6) 

• Control Unit: FANUC 0i-TD or 0i-TF System
• Conversational Interface: Includes FANUC Manual Guide i for easy shop-floor programming
• Hardware Features: FANUC axis drives, spindle motors, remote jog handle, and IC memory card/RS-232 interfaces. 

• Floor Footprint (L x W x H): 222” x 85” x 80”
• Machine Weight: Approximately 13,300 lbs (6,032 kg)
• Power Requirements: 220 VAC, 3-Phase, 30 kVA