2000W Laser Welding Machine Cutter, Cleaner Rust Remover

Best Seller 2000W Laser Welding Machine Cutter, Cleaner Rust Remover Fiber laser 4in1 Welder Only USD $6.900.00 Condition New come with 3 Year Warranty.

Features and Advantages

– Integration and convenience: Integrating the laser, welding system, cooling system, wire feeder, etc. into one, with a compact structure, small floor area, convenient for movement and portability. The bottom is equipped with universal wheels and can be easily moved to different processing sites.
– Double wobble welding: driven by two motors on the X and Y axes, with 7 swing patterns, suitable for complex shapes and structures. Compared to single pendulum welding, it has a larger coverage area, higher fault tolerance, and more aesthetically pleasing welds.

– High welding quality: Good beam quality, high energy density, fast welding speed. The weld seams are smooth, beautiful and firm. The strength can even exceed that of the base metal. The heat-affected zone is small, and the deformation is small. No or only simple subsequent processing is required. It is suitable for fine welding of various metal materials, such as stainless steel, carbon steel, aluminum alloy, etc.
– Simple operation: The operation interface is simple and easy to get started. Ordinary workers can operate proficiently after short-term training, reducing the dependence on professional welders and saving labor costs.

– Diversified welding modes: The integrated handheld laser welding machine can be equipped with nozzles of various angles, has single-pendulum/double-pendulum welding heads, and also has 7 swing forms such as dots, lines and circles to meet the welding requirements of different products and processes.
– Good safety performance: Equipped with safety circuits, laser protective glasses and other devices to avoid accidental light emission, reducing the damage to the operator’s eyes and ensuring operation safety.

– Low energy consumption: Compared with traditional arc welding, it can save about 80%-90% of electrical energy and reduce processing costs.
– Low maintenance cost: Stable operation, maintenance-free or simple maintenance. There is no need to frequently replace consumables. It has a long service life and reduces the long-term use cost of the equipment.

Parameters
Laser Source: Raycus/MAX
Laser Source Power: 2000W
Input Voltage: AC220V±10% 1PH
Laser Wavelength: 1080±10nm
Max Modulation Frequency: 20kHz
Laser Type: Continouous/Modulation
Laser welding Width: 8mm
Laser Cleaning Scanning Width: 100mm
Cooling Method: Water cooling (distilled water, deionized water or pure water as the medium, add antifreeze when it is less than 0 degrees Celsius)
Water Tank Capacity: 16L
Optical Cable Length: 10m standard (customizable)

Spare Parts & Accessories
1 x set of welding gun nozzle and protective lens(6);
1 x cleaning gas ring assembly;
1 x cleaning focusing assembly F800 (including lens);
1 x nozzle-weld cleaning;
1 x set of accessories for the chiller;
1 x single wire feed tube;
1 x double wire feed tube;
1 x main power cord for wire feeder;
1 x american B-type conversion plug;
1 x protective glasses;
1 x USB flash drive;
4 x wire feed wheels.

4IN1—Laser welding
7 wobble modes, wider weld seam, higher fault tolerance than single swing wobble.Wobble welding controls for 8 mm of additional weld width
Fast welding speed, the filler will push the handle while welding, up to 4 times faster than traditional handheld welding processes(tig mig )
Easy operating do not require any training, new users to produce high-quality welds in just a few hours.
Laser welding can weld aluminum and other metal materials, and provides higher-quality, consistent results across a wider range of materials and thicknesses than MIG or TIG with minimal distortion, deformation, undercut or burn-through.

• Laser Output Power: 2000 Watts (Adjustable from 10% to 100%)
• Laser Source Options: Raycus, MAX, or JPT (Lifespan ~100,000 hours)
• Laser Wavelength: 1080 ± 10 nm
• Fiber Cable Length: 10 meters (33 feet) standard
• Operating Mode: Continuous Wave (CW) / Modulated
• Maximum Modulation Frequency: 20 kHz
• Aiming/Positioning: Integrated Red Dot Indicator 

• • Welding Capacity:
    • • Stainless Steel / Carbon Steel / Iron: Up to 5 mm
      • Aluminum: Up to 4 mm
      • Brass / Copper: Up to 2–5 mm
      • Wobble Width: 0.1 to 8 mm (Dual-axis wobble patterns enhance fault tolerance) 

  • Cleaning / Rust Removal Capacity:
    • • Scan Width: 0 to 100 mm adjustable (Allows wide sweeping for rapid stripping)
      • Target Materials: Thick scaling surface rust, mill scale, paint, oil, coatings, and pre-weld oxides 

  • Cutting Capacity:
    • • Maximum Thickness: Up to 3 mm (Best suited for thin sheet metals or quick customization) 

• Input Voltage: 220V ± 10%, Single-Phase, 50/60Hz
• Power Consumption: Peak power requires a 45A to 50A breaker (~10 kW system draw)
• Cooling System: Built-in industrial water chiller (S&A or Hanli brands), 10L to 16L capacity
• Cooling Medium: Distilled or deionized water (requires automotive anti-freeze in freezing climates)
• Auxiliary Gas: Argon (Ar) or Nitrogen (N₂) for clean welding and cutting; clean, dry compressed air for rust cleaning 

• Handheld Torch Head: Lightweight design, utilizing dual-lens protection to prevent dust from damaging the focusing optics. Includes interchangeable copper nozzles tailored for welding, cutting, or wide cleaning. 
• Wire Feeder: Automatic wire feeding system usually included as standard for filling gaps while welding. 
• Safety Features: High-temperature alarms, water flow/undervoltage safety interlocks, and strict class IV laser security triggers (requires torch contact grounding to activate). 
• Total Weight: Typically around 120 kg to 140 kg (approx. 260–310 lbs) housed on heavy-duty caster wheels.